Flexco^® Bolt Hinged Fastening System

The Flexco^® Bolt Hinged Fastening System is ideal for belt conveyor applications subject to length adjustments because the joint can be separated easily by removing the hinge pin. A combination of penetration and compression delivers strength and reliability to belts operating over smaller pulleys.

View Literature, Manuals & Videos

Mechanical fastener rating from 190 to 300 PIW (33-52 kN/m)
Belts from 1/4” to 5/8” (6 mm to 16 mm) thick
Pulley diameters from 6” to 9” (150 mm to 225 mm)
Hinged fastener with easy-to-install nuts and bolts
Easy joint separation with pin removal
Perfect for applications with belts operating over small pulleys
Specially formed teeth penetrate belt carcass for added strength without damaging fibers
Piloted bolts for quick and easy installation
Curved templet aids in accurate placement of bolt holes and uniform tension across the full belt end

Fastener Size	For Belts With Mechanical Fastener Ratings Up To:		Belt Thickness Range		Recommended Minimum Pulley Diameter
Fastener Size					Operating Tension Under 100% of Belt Rating		Operating Tension Under 75% of Belt Rating
					P.I.W.	kN/m	in.	mm	in.	mm	in.	mm
375X	190	33	1/4-13/32	6-11	6	152	4	102
550	300	52	1/4-5/8	6-16	9	230	7	178

FASTENER METALS AND AVAILABILITY

To maximize fastener service life, fastener material must be matched to the application. Flexco manufactures fasteners from a broad range of materials. Our selection makes it easy to specify a fastener that will deliver maximum performance in a variety of conditions—from wet and abrasive applications to highly corrosive environments.

Galvanized Steel: For basic applications, galvanized steel is recommended. It is magnetic, offers good abrasion and rust resistance, but is not recommended for corrosive environments.
Stainless Steel: Stainless steel provides extra resistance to abrasion, magnetic attraction, and corrosion from acids and other chemicals.
MegAlloy^®: Features superior resistance to wear and abrasion. Provides several times the service life of steel. Not recommended where
impact of corrosion is a problem.
Everdur: A corrosion-resistant copper and silicon alloy. Fully non-magnetic and spark-free, low in resistance to abrasion.

Fastener Material	Magnetic	Abrasion Resistant	Chemical Resistant	Rust Resistant	Sparking
Galvanized Steel	Yes	Good	Poor	Fair	Yes
Stainless Steel (300 Series)	Slightly	Good	Good to Excellent	Excellent	Yes
MegAlloy^®	Yes	Excellent	Poor	Poor	Yes
Everdur	No	Poor	Poor	Poor	No

Browse Flexco^® Bolt Hinged Fasteners

Apply FiltersClose

Filter More Resources

Sales Support(6)

Product Literature(3)

Instructions(4)

clear

Resources

Refine Results

Please wait while we gather your results.

Flexco Blogs

Please wait while we gather your results.

MineLine

MINELINE^®
When standard products just won't do.
Flexco Mineline^® products are designed and engineered to work in some of the toughest applications in the world that test the strength and durability of your conveyor system. Products carrying the Mineline® name are proven to work — even where other products have failed.

Flexco^® Bolt Hinged Fastening System

P.I.W.

kN/m

in.

mm

in.

mm

in.

mm

375X

550